 |
- Output Power
- 20Hz–20kHz @ 0.1% THD, both channels driven:
- 8 ohms per channel - 550W
- 4 ohms per channel - 950W
- 2 ohms per channel - 1250W
- RMS @ 1% THD (sine wave), bridged mode:
- 8 ohms - 1750W
- 4 ohms - 2400W
- Peak power, both channels driven:
- 8 ohms per channel - 400W
- 4 ohms per channel - 750W
- 2 ohms per channel - 1000W
- Peak power, bridged mode:
- 8 ohms - 2800W
- 4 ohms - 4000W
- Distortion: <0.02%
- Frequency Response:
- At 10 dB below rated output power - 20Hz–20kHz,
- At -3 dB points - 5Hz–50kHz
- Damping Factor: >300 at 8 ohms
- Noise: -100 dB unweighted, 20Hz–20kHz
- Voltage Gain: 40X (32dB)
- Input sensitivity: 1.15V (+3.4 dBu) VRMS at 8 ohms
- Input impedance: 10kOhm unbalanced, 20kOhm balanced
- Controls:
- Front: Power switch, gain control (channels 1 and 2)
- Rear: DIP switches (10x)
- Indicators:
- Power: Green LED
- Clip: Red LED, 1 per channel
- Signal: Yellow LED, 1 per channel
- Inputs: Balanced XLR and 1/4" TRS connectors
- Outputs: Touch-proof binding posts and professional speaker connectors
- Cooling: Continuously variable-speed fan, back-to-front airflow
- Amplifier Protection: Full short-circuit, open circuit, thermal, and HF protection
- Load Protection: Turn on/off muting, AC coupling
- Circuit Type: Class AB complementary linear output
- Power Supply:
- Mains Voltage/Breaker: 220–230V~, 50/60Hz8A
- Power Consumption: 2600W
- Dimensions: 19"W x 3-1/2"H x 15-4/5"D
- Weight: 37 lb.
|
|
|
